Bohning's Screw-in Bullet Points feature a contour slightly larger than the shaft for smooth arrow removal. These field points are sized in 1/64" increments to ensure a flush fit with the shaft. 17/64" points typically fit weaker spined small (.204 ID) shafts 9/32" points typically fit stiffer spined small (.204 ID) shafts 19/64" points typically fit standard carbon (.246 ID) shafts used for hunting 5/16" points typically fit stiffer spined standard carbon (.246 ID) shafts 21/64" points typically fit large aluminum 21 series with inserts 11/32" points typically fit crossbow bolts Outfit your premium bow set-up with Bohning's Premium Field Points! Certified Crossbow Compatible. Outfit your premium bow set-up with Bohning's Premium Field Points! Each Premium Point is machined to the precise standards you’ve come to expect from Bohning. They're guaranteed to weigh within 0.25 grains of the specified weight and to be concentric (round) within 0.001" (.025mm). Premium Points are made from stainless steel for a durable rust-free finish. The end result is an arrow that spins true and flies clean and stable – time after time.Tech tip: to help prevent points from loosening, apply a small amount of Bohning's Tex-Tite or Seal-Tite Wax to point threads. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Premium Bullet Point with O-Ring. The installed O-Ring keeps your point tight, even with left-helical fletchings. Helps align your point to the arrow insert. 

You’ve got this in your pocket! The new Bohning Pocket Quiver provides a safe, convenient, and secure way to carry field-tipped arrows. The versatile Pocket Quiver holds six arrows of any diameter and can be slipped into a back pocket or hip pocket, or attached to a belt or pack strap. With the integrated anchoring clip, it stays securely attached and gives you quick and easy access to your arrows. The Pocket Quiver is 3.75" W x 5.125" H x 1.25" D. Made in USA

Outfit your premium bow set-up with Bohning's Premium Points! Each Premium Point is machined to the precise standards you’ve come to expect from Bohning. They're guaranteed to weigh within 0.25 grains of the specified weight and to be concentric (round) within 0.001" (.025mm). Premium Points are made from stainless steel for a durable rust-free finish. The end result is an arrow that spins true and flies clean and stable – time after time.Bohning manufactures glue-in Pin Points to fit a wide variety of large diameter aluminum and carbon arrows.Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Featuring the time-saving, serve-less design of the Peep It, the Peep It Pro Kit comes with 6 biasing apertures and 3 strengths of clarifiers. Our lenses have a low coating index which eliminates distortion and the rainbow effect.  With the elimination of the bending of light, your arrow impact point won’t change no matter which direction the sunlight is coming from – whether the sun is to your left or to your right, your arrow impact point on the target remains the same. Our lenses also allow for increased light transmission for superior visibility in all lighting conditions, and offer improved color rendering which aids in target definition. Our Peep It Pro system allows you to change your clarifier and your biasing apertures separately to fine-tune your sight picture. No serving required! 3 color options: black, red, & blue Comes with 3 lenses. 2 additional lenses available for purchase separately Comes with 6 biasing apertures Plunger included for easy lens installation Set Screw tool Made in USA

Bohning's Parabolic Break-off Points fit arrows with an ID of .166" (commonly known as 4mm) and feature two detachable 10 grain weight sections to find your arrow's tuning sweet spot. A tight fit along the full length of the point shank ensures great alignment while evenly spaced grooves hold the appropriate amount of adhesive needed to keep your point securely in place. We recommend using smooth jaw pliers for removing weight sections to minimize marring of the point shank. All .166 Parabolic Break-off Points are 100-110-120 grain weight, and they are available in three different diameters. Type I: For shafts with an OD up to .218" (5.54mm) Type II: For shafts with an OD of .219" to .228" (5.56 - 5.79mm) Type III: For shafts with an OD of .229" (5.82mm) and up. Outfit your premium bow set-up with Bohning's Premium Points! Each Premium Point is machined to the precise standards you've come to expect from Bohning. They're guaranteed to weigh within 0.25 grains of the specified weight and to be concentric (round) within 0.001" (.025mm). Premium Points are made from stainless steel for a durable rust-free finish. The end result is an arrow that spins true and flies clean and stable – time after time. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Traditional .018"diameter nylon serving thread good for end serving, peeps, & nocks . Contains 100 yards (91.4m) per spool

Bohning's Multi-Fletcher® Jig will truly do it all! Every Multi-Fletcher® includes 7 color-coded clamp inserts for different angles, from straight up to a 3° right or left helical. It works with all arrow diameters from X10s to 27s. The Multi-Fletcher® can do a 3 or 4 fletch and will accommodate arrows with standard nocks or x-bow bolts. The rugged 16-gauge stainless steel base and durable composite clamps can be cleaned with acetone to remove adhesive residue. The unique snap-lock clamp plate with inserts provide superior adhesion force and consistent angles, and the feather inserts are specially designed to avoid damage to feathers. Certified Crossbow Compatible. 7 clamp inserts:• Feather 2° Right & 2° Left. Max feather length 5" (127mm)• Vane 1° Right & 1° Left. Max vane length 5" (127mm)• Vane 3° Right & 3° Left. Max vane length 3" (76mm)• Vane Straight. Max vane length 5" (127mm) 3 Fletch: 120°4 Fletch: 90° or 60°x120° The stainless steel base can be screwed to a work table as a single unit or as a multiple jig arrangement.

Bohning's Insert Iron is designed for inserts, points, and outserts. It works on all shaft types - carbon, aluminum, fiberglass, and wood. Insert Iron is our strongest glue and it is NOT reversible. Cure time is 48 hours (72 hours if air is dry during application). Do NOT store Insert Iron in the refrigerator. To prevent it from drying out prematurely, ensure cap & tip are tightly sealed. For added protection, place Insert Iron bottle inside plastic bag or container. One year expiration on unopened bottles. 1oz bottle

The Heat® Vane, with its low profile and quiet flight, is ideal for bowhunting and 3D archery and is NASP approved. It quickly became popular for indoor spots and crossbow bolts as well. Its low profile provides more cable clearance, and the ultra-stiff material the Heat Vane is made of prevents vane flutter for a smooth, silent arrow rotation. When using with a fixed-blade broadhead, we recommend a four fletch. The Heat Vane measures 2.5" (63.5mm) in length, 0.41" (10.4mm) in height, and weighs an average of 6.1 grains (395mg). Like all Bohning vanes, the base of the Heat Vane is pre-primed for optimal adhesion. Due to the ultra-stiff material, we recommend using an instant glue and/or a fletching jig with high adhesion force such as Bohning's Tower Jig or Multi-Fletcher. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Halo serving thread is the highest durability and is made of tightly-braided Spectra. It's suitable for end or center serving. Available in 3 sizes: .014", .021", and .024" (0.14" white turns clear when served tightly)

Incorporates Bohning's clamp style inserts. Fletch any diameter arrow or crossbow bolt. Easy to use. Easy to clean with Acetone. Fletches 3 degree right helical. Other inserts available. Folds flat. Portable/packable. Great for your bench, hunting camp, club, or in your pack. Fletch with nock on, perfect indexing. Small package size: 4" x 3" x 9". 

IMPROVED MAY 2022! Bohning’s Fletching Tape Dispenser now features a thumb wheel and two adjuster knobs that provide finer control over the tape movement and tension control.  Easily apply Premium Fletching Tape while keeping it free of dust and debris with Bohning's Fletching Tape Dispenser. The Fletching Tape Dispenser can be screwed to a work table for added stability. Each Dispenser comes pre-loaded with one roll of Bohning's Premium Fletching Tape for feathers or mylar vanes. Proudly manufactured at the Bohning factory in Lake City, Michigan, United States.

Fletch Prep Wraps are a clear wrap. Available in 5". Comes in a 30 pack For over two decades, Bohning has been the industry leader in crafting the most sought-after archery products. Made from premium, water-resistant vinyl, our fletch prep wraps offer effortless installation with minimal preparation. These wraps improve vane adhesion by providing a smooth, clean surface. Trusted by archers worldwide since 1946, Bohning remains dedicated to providing innovative solutions to the challenges faced by archers, cementing our reputation as the go-to source for top-quality archery accessories. XS         Fits arrow shafts with outer diameters up to 14/64" SM         Fits arrow shafts with outer diameters up to 17/64” STND     Fits arrow shafts with outer diameters up to 19/64” LG          Fits arrow shafts with outer diameters 20/64’ to 24/64” XL          Fits arrow shafts with outer diameters 25/64’ to 26/64”

Fletch Fuse is Bohning's budget-friendly instant glue designed for vanes, points, inserts, outserts, & swedged nocks. It works on all shaft types - carbon, aluminum, fiberglass, wood, and wrapped or crested arrows. Fletch Fuse adhesive is slightly thicker and contains more additives than Blazer® Bond. It requires a clamp time of 30 seconds and a cure time of 2 hours. To prevent Fletch Fuse from drying out prematurely, store it inside a plastic bag/container in a refrigerator NOT containing food or beverages. One year expiration on unopened bottles.

Ferr-L-Tite® was Bohning's first product, developed in 1946, and has been the archery industry's standard ever since! This hot melt adhesive is designed for points, inserts, and outserts on wood and aluminum shafts (for carbon, we recommend Ferr-L-Tite Cool Flex). It requires an open flame for installation or removal and is fully cured as soon as it reaches room temperature (about 5 minutes). Ferr-L-Tite is heat reversible on aluminum shafts - flame required. It has a melting point of 350° F (176.7°C). Available in 12 gram sticks No expiration. Certified Crossbow Compatible. Proudly manufactured at the Bohning factory in Lake City, Michigan, United States.

Ferr-L-Tite Cool Flex® is designed for points, inserts, outserts, and pin bushings on carbon shafts. This hot melt adhesive has flexible properties which keep it from cracking even after repeated target impacts. Cool Flex is a must for carbon shafts, but it also works great on aluminum and fiberglass. It requires a flame for installation, but just use HOT WATER for easy adjustment, replacement, or removal of points, inserts, outserts, and pin bushings. Cool Flex is fully cured as soon as it reaches room temperature (about 5 minutes), and its melting point is 280°F (137.8°C). Available in 12 gram sticks and 1 pound bricks. No expiration. Certified Crossbow Compatible. Proudly manufactured at the Bohning factory in Lake City, Michigan, United States

Protect your feathers from inclement weather with Bohning's Feather-Dri Powder. This colorless, odorless, water-repellent powder is environmentally friendly and so easy to apply. Just shake Feather-Dri onto fletched feathers using the included bag.

Bohning's F Nock fits micro shafts with an ID of .166" (commonly known as 4mm or G Nock) shafts and G UNI Bushing systems. The F Nock features a double-lock throat of .120" (3.05mm). Each F Nock weighs an average of 6.5 grains (421.2 mg). Tech tip: for easier insertion and indexing, apply a small amount of Bohning's Tex-Tite or Seal-Tite Wax to the nock shank. NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market: 1. Computer simulations identify potential weak points. 2. Destructive testing methods expose possible design flaws or material defects. 3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Bohning's Crossbow Lube Kit, in a new larger size, includes one 1.18oz (35ml) tube of Lightning Lube for your crossbow rail and one 0.57oz (16.1 gram) tube of Xccelerator Wax for your strings. Lightning Lube features a sponge-top applicator for an easy, no-mess application. Certified Crossbow Compatible.